CHAUVET DJ D-Fi XLR Pack Wireless DMX Transmitter & Receiver Kit
The CHAUVET DJ D-Fi XLR Pack adds wireless DMX communication to compatible lighting setups. It includes one rechargeable transmitter, three receivers and a multi-charger, helping reduce control cable runs between your controller and fixtures. Compact plug-in units make it a practical addition for mobile DJs, venues and portable lighting rigs.
CHAUVET DJ D-Fi XLR Pack Wireless DMX Kit
The CHAUVET DJ D-Fi XLR Pack helps reduce DMX cable runs across your lighting setup. Compact transmitter and receiver units connect through the equipment's DMX XLR ports, providing a wireless link between your control source and receiving fixtures.
Keep Your Existing Lighting Workflow
Continue programming your controller and addressing fixtures for the looks you want to create. Wireless transmission changes how the control signal travels; it does not replace your lighting controller.
Organise Charging Between Events
The supplied multi-charger accommodates up to eight D-Fi XLR units using contact-pin charging. Two additional USB charging ports provide further charging options.
Plan Around Your Venue
Check the system in the room before your event begins. Position the equipment carefully and test the complete lighting sequence, particularly when the layout differs from your previous show.
Separate Control from Power
The wireless link carries lighting-control data. Each fixture still needs its normal mains or battery power source, so include power distribution in your setup plan.
Who Is the CHAUVET DJ D-Fi XLR Pack For?
- Mobile DJs: Consider it when planning control connections across a portable lighting rig.
- Wedding and event operators: Assess it where long control cable routes are inconvenient.
- Venues: Explore wireless control for lighting positions that change between events.
- Lighting operators: Add it where a wireless link suits your existing controller and fixtures.
D-Fi XLR Wireless DMX or Wired DMX?
| Consideration | Wireless DMX | Wired DMX |
|---|---|---|
| Signal route | Radio link between transmitter and receivers | Physical cable between devices |
| Event preparation | Plan charging, placement and a venue signal test | Plan cable lengths, routing and protection |
| Room layout | Consider obstructions and the wireless environment | Consider access routes and available cable paths |
| Fixture power | Still required separately | Still required separately |
Choose the connection method around your venue and operating requirements. Keep suitable backup cables available when preparing an event.
Explore our lighting controllers and software when building your control setup.
Complete Your CHAUVET DJ D-Fi XLR Setup
Expand your compatible wireless lighting system or find individual replacement units with the CHAUVET DJ D-Fi XLR range.
- Add a receiving point: Choose the CHAUVET DJ D-Fi XLR RX Wireless DMX Receiver to connect additional DMX lighting to your compatible D-Fi system.
- Add or replace a transmitter: Choose the CHAUVET DJ D-Fi XLR TX Wireless DMX Transmitter when you need an individual transmitting unit for a compatible setup.
The D-Fi XLR Pack already includes one transmitter and three receivers. Additional units are sold separately. Check equipment compatibility before expanding your system.
CHAUVET DJ D-Fi XLR Pack FAQs
What does the pack include?
A transmitter, three receivers, multi-charger, external power supply and guide.
Does it power my lights wirelessly?
No. Your fixtures still need their normal power supply.
Does it replace my DMX controller?
No. It transports the control signal.
Are the units rechargeable?
Yes.
How many units fit on the charger?
Up to eight. Four wireless units are supplied.
Is the quoted range guaranteed inside a venue?
No. Test your intended positions before the event.
Can I use it for audio?
No. It is a lighting-control product.
Will it pair with every wireless DMX brand?
Do not assume compatibility. Check the wireless protocol before mixing systems.
Do my fixtures still need DMX addresses?
Yes. Configure addresses and operating modes for your controller's patch.
Can I leave it exposed to rain?
No. It is intended for indoor use.
What Is Included in the D-Fi XLR Pack?
- 1 × D-Fi XLR TX transmitter.
- 3 × D-Fi XLR RX receivers.
- 1 × multi-charger.
- External power supply.
- Quick Reference Guide.
Key Features
- Wireless DMX communication through compact plug-in units.
- Rechargeable transmitter and receivers.
- Multi-charger supports up to eight D-Fi XLR units.
- Contact-pin charging.
- Two additional USB charging ports.
CHAUVET DJ D-Fi XLR Pack Technical Specifications
| Wireless frequency | 2.412–2.484GHz |
|---|---|
| Selectable D-Fi channels | 16 |
| Maximum unobstructed range | 50m |
| Battery type | Rechargeable lithium-ion |
| Transmitter runtime / recharge | Up to 11 hours / 4 hours |
| Receiver runtime / recharge | Up to 10 hours / 2.5 hours |
| Transmitter dimensions / weight | 94 × 27 × 29mm / 68g |
| Receiver dimensions / weight | 88 × 27 × 29mm / 45g |
| Charger dimensions / weight | 270 × 186 × 112mm / 0.2kg |
| External power supply input | 100–240V AC, 50/60Hz |
| Operating environment | Indoor use, IP20 |
| Manufacturer code | DFIXLRPACK |
| UPC | 781462221355 |