Reloop RP-7000 MK2 Silver Direct Drive Turntable

Reloop RP7000MK2 Silver Professional Upper Torque Direct Drive Turntable.

With the RP-7000 MK2 Silver, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.

By using a combination of metal, rubber and synthetic materials, the Silver RP-7000 MK2's housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality classic silver metalic finish.

The Reloop Silver version of the RP-7000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).

As well as the above technical innovations, the RP7000 MK2 Silver is equipped with a few functions that will make any DJ's life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the turntables top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.

Using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the new RP-7000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

Thanks to the recessed rear connection panel, this DJ Turntable can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.

The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 - 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.

RP-7000 MK2 SILVER KEY FEATURES:

NEW in the MK2 version

Built for the club: Rigid chassis construction with an even heavier design with additional reinforcements out of metal, rubber and moulding compound for high vibration damping and isolation

More powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)

Fine-tuned motor control for further optimization of wow and flutter and rotation

Newly developed, height-adjustable tone arm base (VTA) and Anti-Skating control

Particularly light weight and rigid, satin aluminium material used for tone arm

Adjustable Pitch scale for precise adjustments

Optional ground terminal offers additional protection in complex club & studio environments

Easily replaceable, freely rotatable LED needle light in new aluminium design

High-quality and hard-wearing metallic Silver finish

Quartz driven DJ turntable with upper-torque direct drive

Adjustable stop speed (0.2 - 6 sec.)

Precise control of motor with 3 speeds (33 1/3, 45 & 78 RPM)

Precision manufactured, die cast aluminium turntable

Rubber inlays to reduce vibrations and background noise

Static-balance universal S-shaped tone arm with hydraulic lift and anti-skating mechanism

Universal connection for pickup systems (SME)

Pitch range +/-8 %, +/-16 %, +/-50 % (Ultra Pitch)

Quartz lock

Additional start/stop button for vertical positioning

Reverse function: switch for forwards and reverse operation

Recessed connection cavity for easy installation in cases & seamless adjustment

Phono and line out (no earth required)

Removable mains and Cinch cable

Safety mains switch

Shock-absorbing feet to insulate against vibrations