RCF NX 932-A 2100W 12-Inch Active PA Speaker
The RCF NX 932-A is a 12-inch active PA speaker with 2100W peak amplification, FiRPHASE processing and Bass Motion Control. Its plywood cabinet suits demanding portable applications, while flexible deployment options make it a practical choice for DJs, live bands and sound providers needing front-of-house reinforcement, stage monitoring or subwoofer-based systems.
RCF NX 932-A 2100W 12-Inch Active PA Speaker
The RCF NX 932-A is a professional two-way powered loudspeaker built for DJs, bands and sound providers. Combining a 12-inch woofer with a titanium compression driver featuring a 3-inch voice coil and neodymium magnet, it provides a versatile foundation for portable live sound.
Its onboard Class-D bi-amplifier delivers 2100W peak power. RCF's FiRPHASE processing manages phase response, while Bass Motion Control manages woofer excursion. The True Resistive Waveguide provides controlled coverage across the listening area.
Use the NX 932-A as a main PA speaker, a satellite with a suitable subwoofer or a stage monitor. This flexibility is useful when the same equipment needs to cover different event requirements.
A durable plywood enclosure, pole socket and dedicated mounting points support portable and installed applications. Complete your system with suitable stands, signal cables and transport protection to suit the way you work.
Is the RCF NX 932-A Right for You?
- Mobile and wedding DJs: Build a portable PA around a versatile professional speaker.
- Live bands: Cover front-of-house reinforcement or stage monitoring requirements.
- Sound providers: Add a flexible cabinet to equipment used across different events.
- Venues: Consider a professionally planned installation using suitable mounting accessories.
Choose your complete system around the room, programme material and required listening level. Include stands, cables and any subwoofers in your transport and setup planning.
Choosing Your RCF NX 932-A PA Setup
| Configuration | Consider it for | What to plan |
|---|---|---|
| Single NX 932-A | A single reinforcement point or stage monitor. | Coverage, placement and the required signal feed. |
| Pair of NX 932-A speakers | A main PA with two speaker positions. | Suitable stands, positioning and signal distribution. |
| NX 932-A speakers with subwoofers | A system requiring additional low-frequency reinforcement. | Subwoofer choice, crossover settings and system balance. |
| Installed NX 932-A system | A venue with permanent speaker positions. | Approved mounting accessories and professional installation. |
Explore active speaker packages for complete PA setup options.
Complete Your RCF NX 932-A Setup
Prepare your PA for the job with suitable protection, support and connections.
- Protective cover: Add the RCF CVR60754 Padded Speaker Cover, designed to fit the NX 932-A, for protection during transport, handling and storage.
- Speaker stands: Choose compatible 35mm stands with an appropriate load rating for the speaker.
- Signal cables: Add suitable cables to connect your DJ mixer, live mixer or other audio source.
- Active subwoofer: Add suitable low-frequency reinforcement to match your application.
- Mounting accessories: Use approved hardware when planning a permanent installation.
Explore active speaker packages for complete PA setup options.
RCF NX 932-A Frequently Asked Questions
Is the RCF NX 932-A an active speaker?
Yes. Its amplifier is built in, so a separate power amplifier is not required.
Is the 2100W rating peak or continuous power?
RCF specifies 2100W peak amplifier power.
What does the 3-inch compression driver specification mean?
It refers to the driver's voice coil. The compression driver has a 1.4-inch exit.
Can I use it as a stage monitor?
Yes. RCF lists stage monitoring among its supported applications.
Do I need a subwoofer?
That depends on your programme material and output requirements. Consider a suitable subwoofer when additional low-frequency reinforcement is needed.
Can I connect a DJ mixer?
A suitable mixer output can feed the combo XLR/jack input. Use the correct cable and set levels appropriately.
Can it be mounted on a speaker stand?
Yes. It has a 35mm pole socket. Use a suitable stand with an appropriate load rating and follow the installation instructions.
What is the cabinet made from?
The enclosure is plywood with a steel grille.
How much does the RCF NX 932-A weigh?
The published speaker weight is 22.9kg.
Can it be suspended or wall-mounted?
RCF provides mounting options for this model. Use approved accessories and have the installation planned and carried out by qualified personnel.
RCF NX 932-A Key Features
- 2100W peak Class-D bi-amplification: Dedicated amplification for the high and low frequencies.
- 12-inch woofer: Equipped with a 2.5-inch voice coil.
- Titanium compression driver: Neodymium magnet, 1.4-inch exit and 3-inch voice coil.
- Up to 132dB maximum SPL: Manufacturer-rated output at one metre.
- 100° x 70° coverage: Controlled dispersion through the True Resistive Waveguide.
- FiRPHASE processing: Designed to maintain coherent phase response.
- Bass Motion Control: Manages woofer excursion.
- Plywood enclosure: Suitable for portable PA and installation applications.
- Versatile positioning: Use as a main speaker, stage monitor or satellite with a suitable subwoofer.
RCF NX 932-A Technical Specifications
| Speaker type | Two-way active PA speaker |
|---|---|
| Total amplifier power | 2100W peak |
| Low-frequency amplifier power | 1400W peak |
| High-frequency amplifier power | 700W peak |
| Woofer | 12-inch with 2.5-inch voice coil |
| Compression driver | 1.4-inch exit, neodymium magnet and 3-inch voice coil |
| Frequency response | 45Hz–20kHz |
| Maximum SPL at 1m | 132dB |
| Coverage | 100° horizontal x 70° vertical |
| Audio input | Combo XLR/jack |
| Audio output | XLR |
| Controls | Linear, Boost, Stage and Volume |
| Protection | Thermal, RMS and soft limiter |
| Cooling | Convection |
| Power connections | powerCON TRUE1 TOP input/output |
| Cabinet material | Plywood |
| Grille | Steel |
| Pole socket | 35mm |
| Mounting points | Six M10 points and four Quick Lock pin seats |
| Dimensions (H x W x D) | 620 x 362 x 405mm |
| Weight | 22.9kg |