Ortofon VNL DANCE DJ Cartridge Premounted on SH-2 Headshell
Don't Miss Out! This promotion will expires in
The Ortofon VNL DANCE is a high-output DJ cartridge factory-mounted on a black SH-2 headshell. It combines an elliptical stylus, 10 mV output and a UV-reactive neon-yellow stylus body. Fit it to a compatible bayonet tonearm, rebalance the arm and set Ortofon's recommended tracking force of 4.0 g.
Ortofon VNL DANCE Premounted DJ Cartridge with SH-2 Headshell
The Ortofon VNL DANCE Premounted combines the VNL DANCE elliptical DJ cartridge with Ortofon's black SH-2 headshell. It is a practical choice for vinyl DJs who want detailed playback for beatmixing and a cartridge that is already fitted to a headshell. The neon-yellow stylus body fluoresces under UV light, making it easier to pick out in a booth with UV lighting.
Elliptical stylus for detailed vinyl mixing
The VNL DANCE uses an elliptical stylus on an aluminium cantilever. Its tip profile is designed to follow fine changes in the record groove, making it the VNL option to compare if you prioritise detail in vinyl playback. If frequent scratching and back-cueing are central to your sets, compare the spherical VNL TRIX instead.
Factory-mounted on the black SH-2 headshell
The cartridge arrives attached and wired to the headshell, saving you from fitting the small screws and connecting the cartridge leads yourself. The SH-2 uses a universal SME-style bayonet connection. Check your turntable's tonearm fitting and counterweight range, then rebalance the arm and set the recommended 4.0 g tracking force. If your turntable specifies a particular overhang or alignment, check that before playing.
10 mV output for a moving-magnet phono input
Ortofon rates the VNL DANCE at 10 mV output at 1 kHz and recommends a 47 kOhm load. Connect your turntable to a compatible moving-magnet phono input on your DJ mixer, or use a suitable phono preamp before a line input. When the stylus wears, you can replace it without replacing the cartridge or headshell.
Who Is This For?
- Vinyl DJs: Choose the elliptical VNL DANCE if detailed playback and beatmixing are your priorities.
- DJs upgrading a compatible turntable: Choose the premounted version if you want the cartridge and headshell supplied as one assembly.
- Two-deck setups: Order two assemblies if you want the same cartridge and stylus on both turntables. This listing is for one.
Compare Ortofon VNL DANCE Premounted, VNL DANCE and VNL TRIX
- VNL DANCE Premounted on SH-2: Choose this version if you want the elliptical VNL DANCE cartridge already fitted to a black SH-2 headshell.
- Ortofon VNL DANCE DJ Cartridge: Choose the standalone version if you already have a compatible headshell and prefer to mount the cartridge yourself.
- Ortofon VNL TRIX DJ Cartridge: Compare this spherical stylus option if scratching and back-cueing are central to your sets.
Complete Your Ortofon VNL DANCE Setup
- Replacement stylus: Keep an Ortofon Stylus VNL DANCE as a spare so you can replace a worn or damaged stylus without buying another cartridge.
- Phono mixer: Browse DJ mixers and look for a compatible moving-magnet phono input for each turntable you want to connect.
- Record and stylus care: Browse turntable accessories for suitable record and stylus cleaning tools.
Frequently Asked Questions
What does premounted on SH-2 mean?
Ortofon fits and wires the VNL DANCE cartridge to the black SH-2 headshell at the factory. You receive the cartridge, stylus and headshell as one assembly.
Will it fit my turntable?
The SH-2 uses a universal SME-style bayonet fitting. Check that your tonearm accepts this fitting and that its counterweight can balance the 17 g assembly.
Do I still need to set the tracking force?
Yes. Rebalance the tonearm after fitting the assembly, then set Ortofon's recommended tracking force of 4.0 g. Check your turntable's alignment instructions before playing.
What is the difference between VNL DANCE and VNL TRIX?
VNL DANCE uses an elliptical stylus for detailed vinyl playback. VNL TRIX uses a spherical stylus and is the option to compare for scratch-focused use.
Can I replace the stylus without buying another headshell?
Yes. The Ortofon Stylus VNL DANCE is available separately, so you can replace the stylus and keep your cartridge and SH-2 headshell.
Is this a twin pack?
No. This listing is for one premounted assembly. Order two if you want to equip both decks.
Key Features
- Ortofon VNL DANCE DJ cartridge factory-mounted on a black SH-2 headshell.
- Elliptical stylus with an aluminium cantilever for detailed vinyl playback.
- 10 mV rated output at 1 kHz and 5 cm/s.
- Neon-yellow stylus body fluoresces under UV light.
- Universal SME-style bayonet fitting for compatible tonearms.
- 17 g premounted assembly with a recommended tracking force of 4.0 g.
- Replaceable VNL DANCE stylus.
What's Included
1 x Ortofon VNL DANCE DJ cartridge with elliptical stylus, factory-mounted on a black Ortofon SH-2 headshell.
Supplied as one assembly for one turntable.
Specifications
Brand: Ortofon
Model: VNL DANCE Premounted on SH-2
Cartridge type: Moving magnet (MM)
Headshell: Ortofon SH-2 Black
Tonearm fitting: Universal SME-style bayonet
Stylus type: Elliptical
Stylus tip radius: 8/18 µm
Cantilever: Aluminium
Output voltage: 10 mV at 1 kHz, 5 cm/s
Tracking ability: 100 µm at 315 Hz
Channel separation: 22 dB at 1 kHz
Frequency response: 20 Hz to 20 kHz, ±3 dB
Dynamic lateral compliance: 12 µm/mN
Recommended tracking force: 4.0 g
Recommended load resistance: 47 kOhm
Premounted assembly weight: 17 g
Stylus colour: UV-reactive neon yellow
Replacement stylus: Ortofon Stylus VNL DANCE