The Laserworld CS-3000RGB show laser projector comes with a completely new designed compact housing, which is light weight and has a stable bracket. The solid bracket allows for different mounting positions: a hanging as well as a standing installation is possible - ideal for mobile DJs and temporary laser shows, but also for fixed installations at a truss or at the ceiling.

The Laserworld CS-3000RGB is a analog modulated pure diode multi color RGB laser system with a guaranteed output power of 3'000 mW. The red laser source has an output power of 800 mW / 638 nm, the green 900 mW / 520 nm and the royal-blue laser source has an output power of 1'500 mW / 450 nm. The laser sources ensure brilliant colors and powerful laser beams. The projector has very good beam specifications with ca. 4 mm / 1.1 mrad. The galvo system has a scan speed of up to 30kpps @ 8°.

Pattern size can be set by two rotary buttons (X and Y axis) on the rear side of the housing. The sensitivity of the microphone can be adjusted via the integrated display.

Through DMX, in the automatic mode as well as in the sound-to-light mode ca. 130 (layers, tunnels, fences, waves, etc.) can be projected in different colors and in various speed. If the automatic mode is active, the pre-programmed patterns run without assistance and in the sound-to-light mode, the laser system projects according to the sound.

Next to the modes mentioned above, this laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX to a main projector (master projector) project the same patterns like the master projector.

The Laserworld CS-3000RGB is computer controllable through a professional ILDA interface. Thus custom or pre-programmed lasershows, logos, texts or own graphics and animations can be shown in combination with a laser control software.

There are safety features like a key switch, an interlock connector and an on-off switch.

The Laserworld CS-3000RGB is ideal for small to semi-professional applications and is perfectly suitable in bars, small to medium sized clubs and discos as well as for mobile DJs, private use and in any other party location.

3'000 mW analog modulated RGB laser system

DMX controllable, master-slave operation possible

Diode-only laser system

Computer controllable via ILDA

Sound-to-light and stand-alone mode

Front panel laser beam masking plate

Capable of basic graphics, texts and logos

Several hundred colors, including white

30kpps @ 8° scanners

360° mounting bracket

Guaranteed Power: 3'000 mW
Power Red: 800 mW / 638 nm
Power Green: 900 mW / 520 nm
Power Blue: 1'500 mW / 450 nm
Beam Specifications*: ca. 4 mm / 1.1 mrad
Scanner: 30kpps @ 8°
Max. Scan Angle: 40°
Laser Source: Diode
Laser Class: 4
Operation Modes: stand-alone, sound-to-light, DMX, ILDA, master-slave
Basic Patterns: ca. 130 (layers, tunnels, fences, waves, etc.)
Accessories: power cable, manual, interlock, key
Power Supply: 85 V - 250 V AC, 50/60 Hz
Power Consumption: 46 W
Dimensions: 200 x 165 x 141 mm
Weight: 4.0 kg

1 Year Warranty