Laserworld CS 1000RGB MK2 & Showeditor

The Laserworld CS-1000RGB MKII show laser projector comes with a completely new designed compact housing, which is light weight and has a heavy duty bracket.

The bracket allows for different mounting positions: a hanging as well as a standing installation is possible - ideal for mobile DJs and temporary laser shows, but also for fixed installations at a truss or at the ceiling.

The Laserworld CS-1000RGB MKII is a full colour RGB laser system with a total output power of up to 1'000mW and a minimum output power of 800mW.

The red laser source at 650nm has an output power of >200mW, the green at 532nm of >70mW and the royal-blue laser source at a wavelength of 445nm has an output power of >530mW.

The laser sources ensure billiant colours and powerful laser beams.

The projector has good beam specifications with a beam diameter of about 3mm and beam divergence of 2.0mrad. The galvo system has a scan speed of up to 30kpps.

Pattern size and the sensitivity of the microphone can be set by two rotary buttons on the rear side of the housing.

Through DMX, in the automatic mode as well as in the sound-to-light mode about 200 preset patterns, like waves, tunnels, circles etc. can be projected in different colours and in various speed.

If the automatic mode is active, the pre-programmed patterns run without assistance and in the music mode, the laser system projects according to the sound.

Next to the modi mentioned above, this laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX to a main projector (master projector) project the same patterns as the master projector.

The Laserworld CS-1000RGB MKII is computer controllable through a professional ILDA interface. Thus own or pre-programmed lasershows, logos, texts or own graphics and animations can be shown in combination with a laser control software.

There are safety features like a key switch, an interlock interface and an on-off switch.

The Laserworld CS-1000RGB MKII is ideal for semi-professional applications and is perfectly suitable in bars, medium sized clubs and discos as well as for rental companies, mobile DJ's or private use.

Total Power typical: 1.000mW

Minimum output power: 800mW

Power Red: >200mW/650nm

Power Green: >70mW/532nm

Power Blue: >530mW/445nm

Beam Specifications: ca. 3mm / 2mrad

Laser Sources: Diode, DPSS Laser

Laser Class: 4

Operation Modes: auto, music, DMX, ILDA

Scanner: galvo system, 30kpps at 4°

Scan Angle max.: 40°

Basic Patterns: ca. 200 (layers, tunnels, fences, waves, etc.)

Accessories: power cable, manual, interlock connector, key

Power Supply: 85V - 250V AC

Power Consumption: 60 W

Dimensions: 220/155/145 mm

Weight: 3,15 kg