Laserworld BeamBar 10RGB 2500mW Laser
SKU
886971
£1,375.00
In stock
Laserworld BeamBar 10RGB
The Laserworld BeamBar 10RGB is white-light laser system with ten individual apertures. Each can be controlled individually by standard DMX.Due to the analog modulation capability it is possible to create millions of colors, including white.
The individual control of each beam allows for a variety of chaser, beam or fan effects. This makes the Laserworld BeamBar 10RGB ideal for use on stages, at live performances, in clubs and discotheques as well as in TV shows and show productions.
In addition to the versatile DMX control, the BeamBar can run in stand-alone or sound-to-light mode.
Category: Laser Lights for DJs
This special laser effect creates fans of laser beams and can be controlled through DMX or runs in stand-alone or music mode.
The Laserworld BeamBar 10RGB is a bar with 10 single beam laser outlets, each equipped with a 120 mW / 650 nm red, 50 mW / 525 nm green and 80 mW / 450 nm blue laser diode which means it is possible to create millions of colors and white.
Each laser beam can be individually aligned through a 4-point alignment system, that can easily be accessed from the front - so no opening of the housing is necessary.
This show laser light provides an analog modulation. It means a better color fading and a much broader color hue. These facts make the Laserworld BeamBar devices ideal for all applications requiring many different color hues and color fadings.
The Laserworld BeamBar 10RGB can be controlled through DMX channels, so each diode can be controlled individually. Thus it's possible to create many different chaser, beam or fan effects.
Due to the standard DMX compatibility, the Laserworld BeamBar 10RGB can easily be integrated into an existing lighting setup.
This laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX to a main projector (master projector) project the same patterns like the master projector.
The Laserworld BeamBar 10RGB is a great effect for stages, live gigs and nightclubs, as well as for TV Shows and show productions.
The Laserworld BeamBar 10RGB is a bar with 10 single beam laser outlets, each equipped with a 120 mW / 650 nm red, 50 mW / 525 nm green and 80 mW / 450 nm blue laser diode which means it is possible to create millions of colors and white.
Each laser beam can be individually aligned through a 4-point alignment system, that can easily be accessed from the front - so no opening of the housing is necessary.
This show laser light provides an analog modulation. It means a better color fading and a much broader color hue. These facts make the Laserworld BeamBar devices ideal for all applications requiring many different color hues and color fadings.
The Laserworld BeamBar 10RGB can be controlled through DMX channels, so each diode can be controlled individually. Thus it's possible to create many different chaser, beam or fan effects.
Due to the standard DMX compatibility, the Laserworld BeamBar 10RGB can easily be integrated into an existing lighting setup.
This laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX to a main projector (master projector) project the same patterns like the master projector.
The Laserworld BeamBar 10RGB is a great effect for stages, live gigs and nightclubs, as well as for TV Shows and show productions.
- Guaranteed total output power 10 red, green and blue diode modules
- Easy laser alignment via the front plate
- Brightness control - analog modulation
- DMX programmable
- Automatic, stand-alone, and master-slave modes
- Guaranteed Power: 2500 mW
- Power Red: 120 mW / 650 nm
- Power Green: 50 mW / 525 nm
- Power Blue: 80 mW / 450 nm
- Beam Specifications*: ca. 3.0 mm / 0.6 mrad
- Laser Source: Diode
- Laser Class: 3B
- Operation Modes: DMX, stand-alone, Sound-to-Light, master-slave
- Accessories: Interlock connector, manual, key
- IP rating: IP4X
- Power Supply: 100V - 250 V AC 50/60 Hz
- Power Consumption: 72 W
- Dimensions: 1000 x 160 x 105 mm
- Weight: 10.5 kg