Hercules DJ Control Inpulse 500 & HS8 DJ Package

Hercules DJ Control Inpulse 500

Hercules DJControl Inpulse 500: 2-deck USB DJ controller for Serato DJ and DJUCED (included) - built-in audio interface, 16 backlit RGB pads, large jog wheels, built-in hardware input mixer and retractable feet.

THE DJ CONTROLLER THAT WILL GET YOU WHERE YOU WANT TO GO!

Specially designed to help you get started DJing, refine your skills and perform live, DJControl Inpulse 500 is a great companion for all your needs:

• Full-featured: DJControl Inpulse 500 has all the features, modes and connectors you need to mix in front of an audience.
• Precise: high-definition resolution on the jog wheels, with easy-to-use ring. The controller’s audio interface features cutting-edge VELVET SOUND digital signal processing technology.
• Solidly built: sturdy metal backing plate on the mixer, rubber RGB pads, non-slip retractable feet, and more.
• Accessible: mixing is easy, thanks to the controller’s helpful light guides. They keep you on track when you’re mixing in public.

 

 

SMOOTH, ORIGINAL TRANSITIONS

The Filter/FX area lets you customize your set with the effects available in Serato DJ and DJUCED. You can even combine the action of the filter on an effect in DJUCED!

BUILT-IN HARDWARE INPUT MIXER

The AUX FILTER knob lets you add a filter effect onto an external audio source (smartphone, media player, wireless microphone receiver…) — independently of the software! (Inputs: 1/8” / 3.5 mm stereo mini-jack or 2 x RCA)

SOLID RETRACTABLE FEET

DJControl Inpulse 500 is 3.1” / 8 cm tall with its feet extended. Elevate your mixing: run wires underneath, and protect the controller from spilled drinks. The base is backlit when the feet are extended (i.e. folded out).

GET SET UP QUICKLY

Powered via USB, DJControl Inpulse 500 has the master outputs you need to connect your speakers (2 x 1/4” / 6.35 mm jack + 2 x RCA), plus two headphones connectors (1/8” / 3.5 mm stereo mini-jack + 1/4” / 6.35 mm stereo jack).

SYNC YOUR TRACKS MANUALLY

It’s easy to manually mix one track into another with the BEATMATCH GUIDE light guides, which are supported by both DJUCED and Serato DJ Lite.

CONNECT YOUR MICROPHONE — EVEN WITHOUT SOFTWARE!

Connect your microphone to the balanced input, and use the High EQ knob and Low EQ knob to adjust your voice so that you can be heard clearly wherever you’re performing.

ASSISTANT

The Intelligent Music Assistant (IMA) in DJUCED suggests well-suited upcoming tracks to be played from your music library, and in Beatport LINK as well (Beatport subscription required).
Enable the Assistant to launch Autoplay in Serato DJ Lite.

ADJUST YOUR CROSSFADER

Easily adjust the amplitude of the crossfader according to your style of music. Use the curve switch to change the crossfader curve directly on the controller (mix, scratch or off)!

 

 

---

Yamaha HS8 Active Studio Monitor

Yamaha HS8 Monitor Speaker - 120W Combined (75W + 45W) in Black

This second generation of HS8 nearfield reference monitors, like their predecessors, share the same design philosophy as the legendary NS-10M studio monitors – to provide accurate signal reproduction and superior sonic performance.

Designed to meet the needs (and budget) of the project / home studio market, the HS8 monitors offer the perfect balance of size vs performance, making them ideal for any mixing situation. From producers, musicians, media/movie composers through to educators and touring companies.

By combining acquired knowledge and expertise with state-of-the-art sound technologies, Yamaha's speaker engineering team have examined, then optimized, every aspect that has contributed to making these monitors the most trusted in the business.

Sound Philosophy of HS Series Studio Monitors

When selecting studio reference monitors for mixing and music production, one consideration takes precedence above all others - accuracy.

Beginning with the legendary NS-10M, and continuing with the MSP and previous HS Series, this new lineup shares a design philosophy that emphasizes sonic purity without any coloring or alternation of the original sound. While many manufacturers seek to enhance the sound of their monitors to make them sound impressive, Yamaha studio monitors are designed to achieve the best possible mix by ensuring that the sound from your speakers is true to the original. HS Series nearfield reference monitors are the embodiment of this philosophy, delivering a concise sound image, high resolution, and flat response.

Highly efficient Transducers in the HS8

The HS8 features newly developed transducers that achieve astonishingly smooth response over a wide range of bandwidth. These transducers utilize an advanced magnetic field design that regulates the flow of magnetic response to provide seamless, natural sonic transitions. Each component's materials and design were carefully re-examined, then optimized, to drastically improve the accuracy of signal reproduction throughout the audio spectrum.

HS8 Tweeter

The HS8 features a newly designed, highly efficient 1" dome tweeter that extends the usable frequency range considerably and delivers superb high-resolution sound. Utilizing a thick wave guide designed to minimize vibration the new tweeter is able to deliver smooth, distortion-free high end up to 30 kHz.

HS8 Woofer

With newly designed, ultra-responsive woofers that utilize large, carefully selected magnets, HS8 monitors produce low distortion sound with a well-defined bottom end at any output level. All of the components in these high-power woofers, including the woofer ring and the basket further contribute to the HS8's stunning bass while providing clear, accurate mids.

High Performance Amp Unit

The HS8 monitor speakers employ an amplifier unit perfectly matched to the transducers. Featuring a bi-amp design with a separate dedicated amp for both the woofer and the tweeter, this amplifier unit ensures that the HS8 Active Monitor Speaker consistently delivers high-resolution sound with exceptionally flat response across the sound spectrum.

Low Resonance Enclosure Design

HS8 cabinets are designed to eliminate unwanted resonance and increase the accuracy of sound reproduction to their extreme limit. The enclosures are constructed from a very dense and resilient MDF with a damped acoustic response that is perfectly suited for reference monitors. Drawing from Yamaha's over 100 years of piano design experience, HS Series engineers also employed a traditional three-way mitered-joint technique. Common to architectural design this construction firmly anchors the corners of the enclosure to dramatically improve durability and eliminate unwanted resonance that can influence overall sound.

Cutting Edge Noise Reduction Technology

Speaker port design can greatly influence the clarity of overall sound. Often a vortex at the either end of the port can generate air vibrations inside of the port, causing unwanted noise. By adopting an advanced noise reduction technology that incorporates a thorough analysis of a visual representation of the sound, Yamaha's engineers are able to control and reduce the vortex. Through this in-depth analysis we have arrived at the ideal port design, resulting in a reduction of audible noise up to 6dB. The utilization of this state-of-the-art technology allows HS8 studio monitors to meet the demands of more strict professional production environments.

Controls and Connectivity

HS8 feature two response controls with detailed settings that allow them to adapt to the surface acoustics of rooms of varying shape and size. ROOM CONTROL allows you to attenuate the unnatural, exaggerated low-end that can often occur when speakers are placed next to walls, while HIGH TRIM allows for more flexible control of high frequency response. For inputs, HS full-range speakers can accommodate a wide range of balanced and unbalanced sources such as mixers, keyboards and audio interfaces with XLR and TRS phone jacks. With the HS8S subwoofer, HIGH CUT control sets the cutoff frequency of subwoofer output high-frequency attenuation from 80Hz to 120Hz, while PHASE switch adjusts the phase of the subwoofer output. The LOW CUT switch and LOW CUT controls enables attenuation of low frequencies for output between 80Hz and 120Hz. The HS8S subwoofer is equipped with XLR and TRS phone jack for inputs and XLR for outputs.

---

Chord Twin RCA to 2 1/4 Jack Lead 3M

A durable, high quality, shielded audio lead with pro quality, die-cast RCA phono and 6.3mm mono jack plugs, offering exceptional sound and reliability.

Made with twinned high-grade cable; pure copper conductors and cotton-reinforcement; soft-grip, anti-tangle, rubberised jacket; and machine-soldered connections.