We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
FBT VN3000 System Ventis 110A And 2x Subline 115SA Active PA Package
FBT VN3000 System comes complete with the Ventis 110A 700W + 200W RMS 131dB SPL processed active speakers which feature B&C compression drivers and FBT's own custom, long excursion woofers, two-way, bass reflex designs housed in 15mm birch plywood. A full-grille design backed by specially treated acoustic cloth delivers the characteristic style for which FBT is known, while fully rotatable constant directivity horns ensure accurate coverage.
The Ventis 110A is suitable for fixed installation as they are for use on the stage. M10 points are included as standard while an optional U-bracket can be used for wall-mounting. For use on the road, the VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket, and a 45° sloped profile for unobtrusive placement on-stage as a monitor.
Power for the active VENTIS models comes courtesy of a specially designed, Italian made switching mode amplifier module. Low frequencies are driven by a highly efficient 700W RMS (full bridge) Class-D topology, operating with extremely low THD. For the HF stage, a 200W RMS performance is delivered via a meticulously crafted Class-H / AB design.
Finally, DSP on-board the VENTIS 110A enclosure is both user friendly and powerful. Located on the rear of the enclosure, a menu-driven system is navigated via a single rotary control with push-to-select functionality. A total of 6 pre-optimised settings are available, plus 2 further slots for users to form their own designs, using 5 parametric equalizers per slot. Also available is a high-pass filter, a mic/line selector, low, mid and high tone settings and an optional delay of between 0 and 3.5 metres. Finally, users can exclusively choose between two limiter modes, MAX-SPL or MAX-QUALITY, to best suit their performance.
The VN3000 System also comes with the Subline 115SA 700W RMS 132/135dB SPL processed active subwoofers. Created with the aim to maximize SPL/SIZE ratio, they have Class D amplifiers, switch mode power supply and Digital Signal Processor with presets to match any other FBT speaker.
With IN/OUT stereo connectors, it is possible to use only one subwoofer with Left and Right speakers
Optional wheels, ergonomic integrated carrying handles and tour-grade plywood cabinets allow an easy transport
Also included in this package are a pair of connecting poles and all connecting cables.
VENTIS 110A KEY FEATURES:
- 2-way, bi-amplified, bass reflex design
- Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF
- Digital Signal Processor with graphic display
- 15 mm (0.59'') birch plywood scratch resistant enclosure and internal bracing
- High efficiency switch mode power supply
- Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
- 250mm (10'') LF woofer with 50mm (2'') voice coil, custom made for FBT
- 25mm (1'') exit throat B&C HF compression driver with 36mm (1.4'') voice coil
- Frequency response from 58Hz to 20 kHz
- 80°H x 50°V Constant Directivity Rotatable Horn
- 6 x M10 suspension points, optional wall bracket mount thread, 35mm (1 3/8'') top-hat
- Speaker stand socket, one aluminium handle
- 45° monitor taper
SUBLINE 115SA KEY FEATURES:
- Bass-reflex design with high SPL and punch
- 380mm (15'') high excursion magnet woofer with 75mm (3'') voice coil
- Frequency response from 40Hz to 140Hz
- New amplifier engineered and manufactured by FBT, 700W RMS LF in Class D
- Digital Signal processor with 8 presets, 2 equalization with 2 LPF Crossover settings, cardioid configuration
- Control panel with Stereo XLR in/outs, Volume, EQ presets, 8 steps Delay from 0.25m to 3.5m, Phase Reversal Switch 0°-180°, 3 status LED indicators
- 15 mm (0.59'') birch plywood scratch resistant enclosure with internal bracing
- M20 (20mm) top mount speaker stand socket and two aluminum ergonomic FBT handles
Ventis 110A Specifications:
- Code: 40640
- Power cord: 5m
- Net Dimension (WxHxD): 329 x 575 x 325mm
- Net Weight: 15.6kg
- Transport Dimension (WxHxD): 420 x 675 x 400
- Transport Weight: 18.1kg
- Configuration: 2 Way
- Built in amplifier: 900w (700w LF + 200w HF)
- Built in amplifier peak: 1800w (1400w LF + 400w HF)
- Frequency Response: 58Hz - 20kHz -6dB
- Low Frequency Woofer: 10
- High Frequency driver: 1
- Maximum SPL continuous/peak: 124/131dB
- Dispersion (HxV): 80� x 50� rotatable
- Input Impedance: 22kOhm
- AC power requirements: 640VA
- Input Connector: XLR/Jack Combo socket with XLR link out, RCA stereo input
Subline 115SA Specifications:
- Configuration: Subwoofer
- Built-in amplifier LF/HF: 700w
- Built-in amplifier peak LF/HF: 1400w
- Frequency response: 40Hz - 140Hz
- Low Frequency woofer: 15" (3" VC)
- Maximum SPL cont/peak: 132/135dB SPL
- Dispersion: Omnidirectional
- Input connector: Stereo XLR In/Out (High Pass/Link Out)
- Power cord: 5m IEC
- Net Dimension (WxHxD): 500 x 517 x 570mm
- Net Weight: 28 kg
- Transport Dimension (WxHxD): 600 x 617 x 670mm
- Transport Weight: 32kg