We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
FBT VN2000 System Ventis 206A & 2x Subline 112SA Active PA Package
SKU
P153900
Categories: Speakers & PA Packages, Active Speakers, DJ Sound
FBT VN2000 System comes complete with the Ventis 206A 700W + 200W RMS 131dB SPL active speakers which feature B&C compression drivers and FBT's own custom, long excursion woofers, the VENTIS 206 can be deployed as a front fill, an under-balcony fill, as a main providing pristine speech intelligibility or simply as the full-range companion of a subwoofer. Constructed in 12mm birch plywood, the 206 has an integrated rear handle, an optional mounting bracket and, most importantly, an astonishing size to SPL ratio.
Power for the active VENTIS models comes courtesy of a specially designed, Italian made switching mode amplifier module. Low frequencies are driven by a highly efficient 700W RMS (full bridge) Class-D topology, operating with extremely low THD. For the HF stage, a 200W RMS performance is delivered via a meticulously crafted Class-H / AB design.
Finally, DSP on-board the VENTIS enclosures is both user friendly and powerful. Located on the rear of each enclosure, a menu-driven system is navigated via a single rotary control with push-to-select functionality. A total of 6 pre-optimised settings are available (see below), plus 2 further slots for users to form their own designs, using 5 parametric equalizers per slot. Also available is a high-pass filter, a mic/line selector, low, mid and high tone settings and an optional delay of between 0 and 3.5 metres. Finally, users can exclusively choose between two limiter modes, MAX-SPL or MAX-QUALITY, to best suit their performance.
The VN2000 System also comes with the Subline 112SA 700W RMS 130/133 dB SPL processed active subwoofers which are built in birch plywood and aimed to extend the low frequency response to a wide range of FBT speaker systems.
Created with the aim to maximize SPL/SIZE ratio, they have Class D amplifiers, switch mode power supply and Digital Signal Processor with presets to match any other FBT speaker.
With IN/OUT stereo connectors, it is possible to use only one subwoofer with Left and Right speakers
Optional wheels, ergonomic integrated carrying handles and tour-grade plywood cabinets allow an easy transport.
Also included in this package are a pair of connecting poles and all connecting cables.
Power for the active VENTIS models comes courtesy of a specially designed, Italian made switching mode amplifier module. Low frequencies are driven by a highly efficient 700W RMS (full bridge) Class-D topology, operating with extremely low THD. For the HF stage, a 200W RMS performance is delivered via a meticulously crafted Class-H / AB design.
Finally, DSP on-board the VENTIS enclosures is both user friendly and powerful. Located on the rear of each enclosure, a menu-driven system is navigated via a single rotary control with push-to-select functionality. A total of 6 pre-optimised settings are available (see below), plus 2 further slots for users to form their own designs, using 5 parametric equalizers per slot. Also available is a high-pass filter, a mic/line selector, low, mid and high tone settings and an optional delay of between 0 and 3.5 metres. Finally, users can exclusively choose between two limiter modes, MAX-SPL or MAX-QUALITY, to best suit their performance.
The VN2000 System also comes with the Subline 112SA 700W RMS 130/133 dB SPL processed active subwoofers which are built in birch plywood and aimed to extend the low frequency response to a wide range of FBT speaker systems.
Created with the aim to maximize SPL/SIZE ratio, they have Class D amplifiers, switch mode power supply and Digital Signal Processor with presets to match any other FBT speaker.
With IN/OUT stereo connectors, it is possible to use only one subwoofer with Left and Right speakers
Optional wheels, ergonomic integrated carrying handles and tour-grade plywood cabinets allow an easy transport.
Also included in this package are a pair of connecting poles and all connecting cables.
VENTIS 206A KEY FEATURES:
2-way, bi-amplified, bass reflex design
Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF
Digital Signal Processor with graphic display
15 mm (0.59'') birch plywood scratch resistant enclosure and internal bracing
High efficiency switch mode power supply
Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
2x165mm (6.5'') LF woofer with 38mm (1.5'') voice coil, custom made for FBT
25mm (1'') exit throat B&C HF compression driver with 36mm (1.4'') voice coil
Frequency response from 70Hz to 20 kHz
6 x M10 suspension points, wall bracket mount thread, 35mm (1 3/8'') top-hat
One integrated handle
12mm (0.47'') birch plywood scratch resistant enclosure and internal bracing
SUBLINE 112SA KEY FEATURES:
Bass-reflex design with high SPL and punch
320mm (12'') high excursion magnet woofer with 75mm (3'') voice coil
Frequency response from 40Hz to 140Hz
New amplifier engineered and manufactured by FBT, 700W RMS LF in Class D
Digital Signal processor with 8 presets, 2 equalization with 2 LPF Crossover settings, cardioid configuration
Control panel with Stereo XLR in/outs, Volume, EQ presets, 8 steps Delay from 0.25m to 3.5m, Phase Reversal Switch 0°-180°, 3 status LED indicators
15 mm (0.59'') birch plywood scratch resistant enclosure with internal bracing
M20 (20mm) top mount speaker stand socket and two aluminum ergonomic FBT handles
2-way, bi-amplified, bass reflex design
Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF
Digital Signal Processor with graphic display
15 mm (0.59'') birch plywood scratch resistant enclosure and internal bracing
High efficiency switch mode power supply
Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
2x165mm (6.5'') LF woofer with 38mm (1.5'') voice coil, custom made for FBT
25mm (1'') exit throat B&C HF compression driver with 36mm (1.4'') voice coil
Frequency response from 70Hz to 20 kHz
6 x M10 suspension points, wall bracket mount thread, 35mm (1 3/8'') top-hat
One integrated handle
12mm (0.47'') birch plywood scratch resistant enclosure and internal bracing
SUBLINE 112SA KEY FEATURES:
Bass-reflex design with high SPL and punch
320mm (12'') high excursion magnet woofer with 75mm (3'') voice coil
Frequency response from 40Hz to 140Hz
New amplifier engineered and manufactured by FBT, 700W RMS LF in Class D
Digital Signal processor with 8 presets, 2 equalization with 2 LPF Crossover settings, cardioid configuration
Control panel with Stereo XLR in/outs, Volume, EQ presets, 8 steps Delay from 0.25m to 3.5m, Phase Reversal Switch 0°-180°, 3 status LED indicators
15 mm (0.59'') birch plywood scratch resistant enclosure with internal bracing
M20 (20mm) top mount speaker stand socket and two aluminum ergonomic FBT handles
Venits 206A Specifications:
Code: 40639
Power cord: 5m
Net Dimension (WxHxD): 190 x 560 x 260mm
Net Weight: 12.3kg
Transport Dimension (WxHxD): 290 x 660 x 360mm
Transport Weight: 14.3kg
Configuration: 2 Way
Built in amplifier: 900w (700w LF + 200w HF)
Built in amplifier peak: 1800w (1400w LF + 400w HF)
Frequency Response: 70Hz - 20kHz -6dB
Low Frequency Woofer: 2x 6.5
High Frequency driver: 1
Maximum SPL continuous/peak: 124/131dB
Input Impedance: 22kOhm
AC power requirements: 640VA
Input Connector: XLR/Jack Combo socket with XLR link out, RCA stereo input
Subline 112SA Specifications:
Configuration: Subwoofer
Built-in amplifier LF/HF: 700w
Built-in amplifier peak LF/HF: 1400w
Frequency response: 40Hz - 140Hz
Low Frequency woofer: 12" (3" VC)
Maximum SPL cont/peak: 130/133dB SPL
Dispersion: Omnidirectional
Input connector: Stereo XLR In/Out (High Pass/Link Out)
Power cord: 5m IEC
Net Dimension (WxHxD): 430 x 447 x 480mm
Net Weight: 23 kg
Transport Dimension (WxHxD): 530 x 547 x 580mm
Transport Weight: 27 kg
Code: 40639
Power cord: 5m
Net Dimension (WxHxD): 190 x 560 x 260mm
Net Weight: 12.3kg
Transport Dimension (WxHxD): 290 x 660 x 360mm
Transport Weight: 14.3kg
Configuration: 2 Way
Built in amplifier: 900w (700w LF + 200w HF)
Built in amplifier peak: 1800w (1400w LF + 400w HF)
Frequency Response: 70Hz - 20kHz -6dB
Low Frequency Woofer: 2x 6.5
High Frequency driver: 1
Maximum SPL continuous/peak: 124/131dB
Input Impedance: 22kOhm
AC power requirements: 640VA
Input Connector: XLR/Jack Combo socket with XLR link out, RCA stereo input
Subline 112SA Specifications:
Configuration: Subwoofer
Built-in amplifier LF/HF: 700w
Built-in amplifier peak LF/HF: 1400w
Frequency response: 40Hz - 140Hz
Low Frequency woofer: 12" (3" VC)
Maximum SPL cont/peak: 130/133dB SPL
Dispersion: Omnidirectional
Input connector: Stereo XLR In/Out (High Pass/Link Out)
Power cord: 5m IEC
Net Dimension (WxHxD): 430 x 447 x 480mm
Net Weight: 23 kg
Transport Dimension (WxHxD): 530 x 547 x 580mm
Transport Weight: 27 kg
5 Year Warranty