FBT JMaxX 110A 900W Active Speaker
JMaxX 110A Processed 2-way active loudspeaker 700W + 200W – 129.5 dB SPL (peak)
FBT JMaxX 110A combines ease of use and versatility for many portable or installed sound applications: musicians, DJs, AVL contractors, rental sound reinforcement, corporate events, houses of worship, bars and clubs.
With its eye-catching gas-injected forms designed to virtually eliminate undesired enclosure resonance and reinforce strong low frequency performance, the 10-inch JMaxX 110A is equipped with FBT’s latest 90° x 60° HF horn design which delivers improved projection, accuracy, and dispersion of the mid and high frequencies.
Providing a myriad of possibilities for bands, DJs and solo artists, as well as for permanent installations, the JMaxX 110A is actually four loudspeakers in one. Derived from a decade of experience of portable sound reinforcement, the carefully tailored equalisation presets offer highly intelligible response for vocals and floor monitoring; slightly boosted response in lounge bar applications; punchy and forward sound for DJs and night venues; and a general-purpose EQ setting that mirrors the original and familiar FBTMaxX voicing.
The JMaxX 110A features FBT’s latest generation lightweight 700W + 200W Class D power amplifier with universal switch mode power supply, delivering abundant power and headroom to reproduce even the largest transients without distortion.
XLR inputs and outputs, volume control, the EQ presets and filters, and ground lift switch are all conveniently located on a clearly laid out rear panel, making loudspeaker setup and operation intuitive and consistently repeatable.
The JMaxX versatility is further underscored by the many mounting and fixing options that the ergonomically styled cabinets provide. Mounting in fixed installations is made easy using the M10 suspension points or wall bracket flange plates, while portable use is facilitated by the built-in 35mm pole mount socket.
There’s no need for separate stage monitors, as JMaxX’s cabinet profiles are designed with 12°, 40°, and 55° wedge angles, and when used with the specific floor monitoring EQ presets, will ensure that performers hear themselves with ultimate clarity.
Weighing just 11Kg and Packing a genuine 900 Watts RMS The JMaxX 110A is sufre to win over many new admirers
FBT SUBline 112SA Processed Active Subwoofer - Black
Designed and manufactured in Italy, the SUBline range of bass reflex subwoofers delivers more power from smaller, more portable enclosures, with Class D amplification, switch-mode power supplies and DSP presets for accompanying full range enclosures.
Encompassing two passive and four active models, SUBline boasts road-ready, tour-grade birch plywood construction, integrated carrying handles and optional wheels, plus in/out stereo connectors facilitating the use of a single sub in left-right stereo set-ups.
Ultimax MSA-220BK Adjustable Speaker Pole With M20 Thread
The StageCore MSA220 Speaker Pole with M20 Thread is a dependable and adaptable solution for mounting your speakers in a professional audio environment.
Its rugged construction, height adjustability, and compatibility with a wide range of speakers make it an excellent choice for musicians, DJs, and audio engineers seeking reliable support for their valuable sound equipment.
With this speaker pole, you can elevate your sound and ensure a stable and secure setup at every performance.
FBT V63 PROMaxX 110 / JMaxX 110 Speaker Cover
This is the perfect way to protect your FBT Pro maxx 10 or 110a speakers with this official FBT branded padded speaker cover.
FBT SL-C 12SA SUBline 12SA Cover
Covers designed to fit over and protect the Subline Sl-CH18 SA 18'' Active Sub while still allowing access to the handles, and wheels.
StageCore CORE350LU6-BK Male XLR - Female XLR 6M
Female XLR Connector - Male XLR Connector, Professional Audio Cable - Includes Hook & Loop Tie
StageCore CORE350LU3-BK Male XLR - Female XLR 3M
Female XLR Connector - Male XLR Connector, Professional Audio Cable - Includes Hook & Loop Tie
FBT JMaxX 110A 900W Active Speaker
- 10 " LF woofer and a 1’’ exit throat HF compression driver with 1.4” voice coil
- 700W RMS Low Frequency AND 200W RMS for High Frequency , Class D power amplifiers with switch mode power supply
- DSP with 4-EQ presets Control panel with: XLR IN and XLR LINK, Volume, EQ presets, HP filter, GND LFT switch
- 2 x M10 suspension points, 35mm (1.3/8”) top-hat speaker stand socket, wall bracket mount flange plate
- 90°H x 60°V constant directivity horn Stage monitor angling facility with 12°, 40° or 55° taper
- Just 11Kg
FBT SUBline 112SA Processed Active Subwoofer - Black
Bass-reflex design with high SPL and punch
320mm (12'') high excursion magnet woofer with 75mm (3'') voice coil
Frequency response from 40Hz to 140Hz
New amplifier engineered and manufactured by FBT, 700W RMS LF in Class D
Digital Signal processor with 8 presets, 2 equalization with 2 LPF Crossover settings, cardioid configuration
Control panel with Stereo XLR in/outs, Volume, EQ presets, 8 steps Delay from 0.25m to 3.5m, Phase Reversal Switch 0°-180°, 3 status LED indicators
15 mm (0.59'') birch plywood scratch resistant enclosure with internal bracing
M20 (20mm) top mount speaker stand socket and two aluminum ergonomic FBT handles
Ultimax MSA-220BK Adjustable Speaker Pole With M20 Thread
High-Quality Construction:The StageCore MSA220 Speaker Pole is constructed with precision and durability in mind. It is made from robust materials that can withstand the rigours of the road and the demands of frequent use.
M20 Thread:The speaker pole features an M20 thread at the bottom, which is a widely accepted industry standard for mounting loudspeakers. This thread ensures a secure and stable connection between the pole and your speaker, minimising the risk of wobbling or accidental disconnection during performances.
Adjustable Height:This speaker pole is designed with height adjustability in mind. You can easily extend or retract the pole to achieve the desired speaker placement. Whether you need to raise your speaker to reach a larger audience or keep it at ear level for a more intimate setting, this pole provides flexibility.
Safe Load Capacity:The StageCore MSA220 Speaker Pole is engineered to support a substantial load capacity. It can securely hold heavy loudspeakers, making it suitable for a wide range of speakers used in professional audio setups.
Easy to Transport:The compact and lightweight design of this speaker pole makes it easy to transport to gigs, concerts, or events. It won't add unnecessary bulk to your equipment loadout.
Non-Slip Design:To ensure stability during use, the speaker pole features a non-slip surface. This prevents your speaker from shifting or sliding during performances, keeping your setup safe and reliable.
Compatibility:The M20 thread on the StageCore MSA220 Speaker Pole is compatible with a variety of professional loudspeakers and subwoofers, making it a versatile choice for audio professionals.
Professional Appearance:The sleek and professional design of this speaker pole complements the aesthetics of your audio setup, giving your performance area a polished and organised look.
FBT JMaxX 110A 900W Active Speaker
- Code: 42604
- Configuration: 2 Way
- Built-in amplifier LF/HF: 700w/200w
- Frequency response: 58Hz - 20kHz
- Low Frequency woofer: 10" (2" VC)
- High Frequency driver: 1" (1" VC)
- Maximum SPL cont/peak: 129.5 dB
- Dispersion: 90 x 60
- Input connector: XLR + 6.3mm Jack
- Power cord: 5m IEC
- Net Weight: 11kg
FBT SUBline 112SA Processed Active Subwoofer - Black
Configuration: Subwoofer
Built-in amplifier LF/HF: 700w
Built-in amplifier peak LF/HF: 1400w
Frequency response: 40Hz - 140Hz
Low Frequency woofer: 12" (3" VC)
Maximum SPL cont/peak: 130/133dB SPL
Dispersion: Omnidirectional
Input connector: Stereo XLR In/Out (High Pass/Link Out)
Power cord: 5m IEC
Net Dimension (WxHxD): 430 x 447 x 480mm
Net Weight: 23 kg
StageCore CORE350LU6-BK Male XLR - Female XLR 6M
- Connector A Female XLR
- Connector B Male XLR
- Length 6m
- Colour Black
StageCore CORE350LU3-BK Male XLR - Female XLR 3M
- Connector A Female XLR
- Connector B Male XLR
- Length 3m
- Colour Black