Eliminator Lighting Flux FX 3-Head Rotating LED Blinder & RGB Effect

Eliminator Flux FX Rotating LED Blinder with RGB Halo Effects

The Eliminator Lighting Flux FX is a three-head LED centrepiece for stages, DJ booths and event production. Six 40W amber COB LEDs produce warm beams and blinder accents, while six RGB background sections and six RGB halo strips add colour and animated patterns. Use the RGB background to set the look, then bring in the amber output for an accent at a transition or show cue.

Build movement into your lighting cues

The three heads rotate continuously through 360 degrees, so the beam positions can keep changing throughout a cue. Over DMX, you can control each rotating head, the RGB background sections and the halo strips individually. Choose the 24-channel mode when you want to use fewer DMX addresses, or the 64-channel mode for more detailed programming. A 34-channel mode is also available.

Run built-in programmes without a lighting desk

Choose from 20 amber LED programmes, 30 RGB background programmes and 85 RGB halo programmes. Auto and Sound Active modes let you run the fixture without a separate controller, while Primary/Secondary mode lets compatible fixtures run together.

Use it at floor level or integrate it into a truss rig

Stand the Flux FX vertically on its included 500 x 400 mm floor base to add movement behind performers or beside a DJ booth. For overhead installation, two mounting brackets and a safety eyelet are supplied. Rigging clamps are sold separately. The fixture stands 1.36 m high and weighs 16.4 kg with the floor base included.

Who Is This For?

• Mobile DJs: Use it as a floor-standing centrepiece behind your booth when you want moving beams and animated colour from one fixture.
• Bands and stage productions: Add warm amber accents and RGB patterns behind performers to give the stage more depth.
• Lighting operators: Programme head movement, background colour and halo chases separately to fit the timing of your show.

Compare Eliminator Flux FX, Roto Blade and Roto Kraze

• Eliminator Flux FX: Choose this for three continuously rotating heads, warm amber blinder beams and animated RGB halos, with an included base for floor-level use.
• Eliminator Roto Blade: Compare this if you want a moving head with motorised pan and tilt, RGBW beams and an RGBW magic-ball effect.
• Eliminator Roto Kraze: Compare this if you want a compact centrepiece with a dedicated RGBW colour wash, beams and animated LEDs.

Complete Your Eliminator Flux FX Setup

• DMX control: Choose a 3-pin DMX cable to connect the Flux FX to your controller or existing DMX chain.
• Overhead mounting: The fixture includes two mounting brackets and a safety eyelet. Use suitable rated rigging clamps and secondary safety hardware in accordance with the manufacturer's instructions.
• Make the amber beams visible in the air: Where the venue permits haze, pair the fixture with a dedicated hazer such as the Chauvet Hurricane Haze 4D DMX Haze Machine.