Alto TS415 2500 Watt 15" Active Speaker With Bluetooth
- Buy 2 for £354.50 each and save 1%
Unleash Powerful Sound with the Alto TS415 Active Speaker
Experience the ultimate in audio performance with the Alto TS415 Active Speaker. Designed to deliver powerful, crystal-clear sound, this speaker is a game-changer for DJs, musicians, and event organizers alike. With its impressive 2500W peak power, the TS415 commands attention and fills any venue with rich, immersive sound.
Equipped with advanced features, the TS415 offers Bluetooth connectivity, allowing you to effortlessly stream music wirelessly from your devices. The convenient integration of Bluetooth technology makes it easy to set the mood and keep the party going without any hassle.
The TS415's versatile design makes it perfect for various applications. Whether you're performing at a live event, setting up a mobile DJ rig, or outfitting a permanent installation, this speaker adapts to your needs. Its lightweight enclosure and integrated suspension points enable hassle-free transport and setup, while the pole-mountable design offers flexibility in positioning.
With the built-in 3-channel mixer, you have complete control over your audio. Connect microphones, instruments, or line-level sources directly to the speaker, eliminating the need for additional mixers or equipment. The powerful class D amplifier ensures efficient and reliable performance, while the fanless cooling design keeps things running smoothly without any distracting noise.
Experience the difference that the Alto TS415 Active Speaker brings to your sound system. Elevate your performances, fill the air with incredible sound, and leave your audience in awe. Whether you're a professional DJ, a touring musician, or an audio enthusiast, the TS415 sets a new standard for audio excellence.
- 2500W for powerful performance
- FREE Alto App (iOS/Android) for remote configuration and control (Coming Soon)
- Bluetooth® audio streaming direct from device
- On-board DSP with 4 Speaker Use modes (inc. Custom EQ via App)
- True Wireless Stereo speaker linking via Bluetooth
- Integrated 3-channel mixer with dual XLR ¼-inch combo inputs, mic/line switches and independent level controls
- XLR Mix output, Speaker Use, and Sub Size Controls
- 15” driver, 2.5” (63 mm) high-temperature voice coil
- 1” exit ceramic driver with 1.4” (35 mm) coil
- Lightweight enclosure for easy transport, set up and installation
- Versatile design - pole-mountable, wedge monitor or flown application with integral M10 suspension points
- Powerful and efficient class D amplifiers with fanless cooling design to run cleaner, quieter and with greater long-term reliability
- Designed and tuned in the USA
Output Power 2500 W
Low-Frequency Driver: 15.0” driver, 2.5” (63 mm) high-temperature voice coil. 1 x 800 W RMS @ 2 Ω.
High-Frequency Driver: 1.0” exit ceramic driver with 1.4” (35 mm) coil. 1 x 450 W @ 4 Ω.
Crossover Frequency: 2 kHz
Maximum SPL: 135 dB (peak), 132 dB (continuous) (dB-SPL @ 1 m)
Frequency Response: 44 Hz – 20 kHz (+/- 3 dB)
Frequency Range: 33 Hz – 20 kHz (-10 dB)
Horn Coverage: 90° horizontal x 60° vertical (nominal)
Connectors: (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced), (1) XLR output (Link), (1) IEC power cable input
Input Impedance Line: 10 KΩ balanced, 20 KΩ unbalanced, Mic: 1.2K
Line Gain/Volume Control Range: -∞ to 0 dB, +4 dBu nominal, +10 dBu for max output
Mic/Inst. Gain/Volume Control Range: -∞ to +50 dB
USB Charging Port: 5V 2.1A
Controls: Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
Indicators:(1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red = Ch1/2 Output Clipped), (1) Bluetooth LED (Blue), (1) Link LED (Orange), (4) DSP Presets LED (Green), (3) HPF LED (Green)
Power Connection: IEC
Voltage: 100-120V, 50/60Hz; 220-240V, 50-60Hz
Consumption: 1100W
Fuse: 100-120V T15AL AC250V; 220-240V T6.3AL AC250V
Protection: Electronic clip, thermal, and transducer overdrive protection
Enclosure: Injected Molded Enclosure and Perforated Metal Grille
Mounting/Installation: Standard 36 mm pole socket, flown application with integral M10 suspension points, or in a wedge monitor position
Operating Temperature: -10°C to 45°C (14°F to 113°F)
Dimensions: (height x width x depth) 25.3” x 16.4” x 15.8” / 643 x 417.5 x 402 mm
Weight: 38.0 lbs. / 17.2 kg
Related Products
